Address76 Forth Street, Liverpool L20 8JW
Call us+44 151 352 9026
Email ussales@tranect.co.uk

Hydraulic Crimping Press – Bench Mounted

Tranect 30-ton Bench Mounted Hydraulic Crimping Press for use with Ultra Heavy Duty and Enhanced Heavy Duty Terminals is supplied with:

  • top die holder
  • bottom die holder
  • hydraulic coupler
  • hydraulic hose
  • hydraulic pump – choice of either electric or compressed air powered.
  • Tranect 35 Ton hydraulic crimping press is recommended for use with Tranect dies to crimp Tranect terminals.
  • Each press is stamped with the initials of the technician who assembled it, along with a date code – allowing total traceability.
  • All presses are supplied with a two year back to base warranty.

We service and recondition old hydraulic crimping presses.

We can also supply a heavy duty hydraulic cable cutter for cutting up to 400 mm² cable.

Item BR Cat No G Corner ref
30 Ton Hydraulic crimping press 39/008318 30T Crimping Press
Pump, air operated 39/008323 LAHP
10 mm2 crimp dies   Die F
16 mm2 crimp dies   Die G
25 mm2 crimp dies 39/014511 Die H
35 mm2 crimp dies 39/014512 Die I
50 mm2 crimp dies 39/008177 Die J
70 mm2 crimp dies 39/008178 Die K
95 mm2 crimp dies 39/008179 Die L
120 mm2 crimp dies 39/008180 Die M
150 mm2 crimp dies 39/008181 Die N
185 mm2 crimp dies 39/008182 Die O
240 mm2 crimp dies 39/008183 Die P
300 mm2 crimp dies 39/008184 Die Q
400 mm2 crimp dies 39/008186 Die R
Hose+connectors – 2 mtrs 39/008238 BO/500/2
Hose+connectors – 3 mtrs 39/008239 BO/500/3
Hose connector – female 39/008098 BO/127
Hose connector – male 39/008099 BO/128
Top die holder 39/008233 TOPDH/R/35P
Bottom die holder 39/008228 BTMDH/R/35P
Go Gauge plate F to K 39/029061 TA13209
Go Gauge plate L to O 39/029063 TA13210
Go Gauge plate P to R 39/029065 TA13211

There is a crimp die for each size of standard terminal. Each crimp die is engraved with the crimp size code letter: F,G,H,I,J,K,L,M,N,O,P,Q,R and R.

There is a separate range of crimp dies for the Ultra-Heavy Duty terminals: K-X,M-X,N-X,O-X.
Operating instructions are available based on British Rail WOSS 560/4.
The crimp die is held in the die holder with a split pin.

Crimp ‘GO’ gauge for G Corner lugs:

For crimp size:

“F” to “K” use gauge TA13209
“L” to “O” use gauge TA13210
“P” to “R” use gauge TA13211
““K-X” to “O-X” use gauge TA13213

Calibration certificates can be provided if required.

UB-412HE Hydraulic Crimping Press for use with our Heavy Duty and Enhanced Heavy Duty Terminals

Specification:

  • Length: 276 (L)mm
  • Weight: 0kgs
  • Pressure: 700 bar
  • Oil Required: 53 cc
  • Max Output: 12 ton
  • Jaw Opening: 32mm

There is a crimp die for each size of Heavy Duty and Enhanced Heavy Duty lugs. Each crimp die is engraved with cable size or crimp code letter: F, G, H, I, J and K for the G Corner lugs.

Operating instructions are available based on British Rail WOSS 560/4.

Accessories for UB-412HE
Cable size mm²

Die set for

Heavy Duty lugs

Die set for

Enhanced Heavy Duty lugs

10 Cu-10 Cu-F
16 Cu-16 Cu-G
25 Cu-25 Cu-H
35 Cu-35 Cu-I
50 Cu-50 Cu-J
70 Cu-70 Cu-K
95 Cu-95  
120 Cu-120  
150 Cu-150  
185 Cu-185  
240 Cu-240  
300 Cu-300  
400 Cu-400