Hydraulic Crimping Press – Bench Mounted

• 

• 

• 

• 

• 

Tranect 35-ton Bench Mounted Hydraulic Crimping Press for use with Ultra Heavy Duty and Enhanced Heavy Duty Terminals is supplied with:

• top die holder
• bottom die holder
• hydraulic coupler
• hydraulic hose
• hydraulic pump – choice of either electric or compressed air powered.
• Tranect 35 Ton hydraulic crimping press is recommended for use with Tranect dies to crimp Tranect terminals.
• Each press is stamped with the initials of the technician who assembled it, along with a date code – allowing total traceability.
• All presses are supplied with a two year back to base warranty.

We service and recondition old hydraulic crimping presses.

We can also supply a heavy duty hydraulic cable cutter for cutting up to 400 mm² cable.

Item	BR Cat No	G Corner ref
Hydraulic press	39/008318	R/35P
Pump, air operated	39/008323	LAHP
10 mm2 crimp dies		Die F
16 mm2 crimp dies		Die G
25 mm2 crimp dies	39/014511	Die H
35 mm2 crimp dies	39/014512	Die I
50 mm2 crimp dies	39/008177	Die J
70 mm2 crimp dies	39/008178	Die K
95 mm2 crimp dies	39/008179	Die L
120 mm2 crimp dies	39/008180	Die M
150 mm2 crimp dies	39/008181	Die N
185 mm2 crimp dies	39/008182	Die O
240 mm2 crimp dies	39/008183	Die P
300 mm2 crimp dies	39/008184	Die Q
400 mm2 crimp dies	39/008186	Die R
Hose+connectors – 2 mtrs	39/008238	BO/500/2
Hose+connectors – 3 mtrs	39/008239	BO/500/3
Hose connector – female	39/008098	BO/127
Hose connector – male	39/008099	BO/128
Top die holder	39/008233	TOPDH/R/35P
Bottom die holder	39/008228	BTMDH/R/35P
Go Gauge plate F to K	39/029061	TA13209
Go Gauge plate L to O	39/029063	TA13210
Go Gauge plate P to R	39/029065	TA13211

There is a crimp die for each size of standard terminal. Each crimp die is engraved with the crimp size code letter: F,G,H,I,J,K,L,M,N,O,P,Q,R and R.

There is a separate range of crimp dies for the Ultra-Heavy Duty terminals: K-X,M-X,N-X,O-X.
Operating instructions are available based on British Rail WOSS 560/4.
The crimp die is held in the die holder with a split pin.

Crimp ‘GO’ gauge for G Corner lugs:

For crimp size:

“F” to “K” use gauge TA13209
“L” to “O” use gauge TA13210
“P” to “R” use gauge TA13211
““K-X” to “O-X” use gauge TA13213

Calibration certificates can be provided if required.

UB-412HE Hydraulic Crimping Press for use with our Heavy Duty and Enhanced Heavy Duty Terminals

Specification:

• Length: 276 (L)mm
• Weight: 0kgs
• Pressure: 700 bar
• Oil Required: 53 cc
• Max Output: 12 ton
• Jaw Opening: 32mm

There is a crimp die for each size of Heavy Duty and Enhanced Heavy Duty lugs. Each crimp die is engraved with cable size or crimp code letter: F, G, H, I, J and K for the G Corner lugs.

Operating instructions are available based on British Rail WOSS 560/4.

Accessories for UB-412HE
Cable size mm²	Die set for Heavy Duty lugs	Die set for Enhanced Heavy Duty lugs
10	Cu-10	Cu-F
16	Cu-16	Cu-G
25	Cu-25	Cu-H
35	Cu-35	Cu-I
50	Cu-50	Cu-J
70	Cu-70	Cu-K
95	Cu-95
120	Cu-120
150	Cu-150
185	Cu-185
240	Cu-240
300	Cu-300
400	Cu-400